If you are looking for free 300-610 dumps than here we have some sample question answers available. You can prepare from our Cisco 300-610 exam questions notes and prepare exam with this practice test. Check below our updated 300-610 exam dumps.
DumpsGroup are top class study material providers and our inclusive range of 300-610 Real exam questions would be your key to success in Cisco CCNP Data Center Certification Exam in just first attempt. We have an excellent material covering almost all the topics of Cisco 300-610 exam. You can get this material in Cisco 300-610 PDF and 300-610 practice test engine formats designed similar to the Real Exam Questions. Free 300-610 questions answers and free Cisco 300-610 study material is available here to get an idea about the quality and accuracy of our study material.
An engineer must build a VXLAN flood-and-learned network. The customer requires the solution to be based on the IETF documented practice in RFC 7348. The solution must use broadcast, unknown unicast, and multicast (BUM) and include the efficient BUM and short BUM replication modes that use only shared trees. Which technology meets these requirements?
Which two automation requirements can be met by using Puppet? (Choose two.)
An engineer must design a secondary site to prevent a catastrophic primary site failure.The applications must communicate across sites via the data link layer of the OSI model.The Layer 3 transport that is available for this solution consists of 10-Gb connections overLayer 3.Which two solutions meet these requirements? (Choose two.)
An engineer must design a secondary site to prevent a catastrophic primary site failure.The applications must communicate across sites via the data link layer of the OSI model.The Layer 3 transport that is available for this solution consists of 10-Gb connections overLayer 3.Which two solutions meet these requirements? (Choose two.)
A network consultant must design a high availability interconnection of a clustered CiscoUCS Fabric Interconnect toward two upstream Layer 2 switches. The Ethernetinterconnection must use all redundant links and have no impact on the STP domain size.Which connectivity solution must be used?
A engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure. Which tool meets these requirements?
An engineer is building a data center network with VXLAN EVPN. The requirement is touse multicast for the broadcast, unknown unicast, and multicast replication.Which two VNI to multicast group mapping methods must be used to meet theserequirements? (Choose two.)
An engineer must connect a Cisco UCS B-Series based system to an existing largestorage area network fabric. The deployment must support hardware-based load balancing,prevent Fibre Channel domain ID exhaustion, and enable all blade servers to be in thesame VSAN. Which set of actions meets the requirements?
Which type fields can an engineer use to identify an iSCSI participant? (Choose two.)
An engineer must logically partition two Cisco Nexus 7000 Series Switches into twoenvironments called Test_39919596 and Production_59423879. The environments mustuse only F2-Series line cards and be limited to a maximum of 265 port-channels. WhichCisco Nexus feature must be used?
What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?
A network engineer must design a data center network with four Cisco Nexus 7706switches. The switches will be installed in primary and secondary data centers in vPCdomains. The two data centers must be connected via Layer 2 links and provide themaximum throughput, redundancy, and avoid port-blocking spanning-tree design.Which deployment model meets these requirements?
A company must introduce a scalable network automation tool to deploy, configure, andmanage thousands of network device and service. The company servers already havebeen security-hardened and must not have any additional software installed on team. Thesecurity policy mandates the use of a secure communication protocol that supportauthentication and encryption for managing the servers. Which two automation tools mustbe used to meet these requirements? (Choose two.)
A customer must install a new Hyperflex Stretched cluster in two sites. Low latency and predictable high performance are the top priorities for this setup due to the extensive usage of data-intensive applications across the cluster. Which HyperFlex storage solution is recommended to meet these requirements?
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have been access to its own VRF instance. Which interface should be used to meet these requirements?
An engineer is implementing a storage area network where an NPV is used. The engineernotices that the servers in a storage farm are experiencing heavy traffic contention. Theengineer needs to migrate traffic from heavily loaded server interfaces to interfaces withless load. When the new links are deployed, the existing traffic is not rebalanced asexpected. Which feature must be used to meet these requirements?
An engineer must secure the payload traversing across the DCI. The solution must supportconfidentially and integrity and it must be open standard. The solution must encryptEthernet frames regardless of the upper layer protocol used. Which technology must beused to support these requirements?
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
A network engineer must select a high availability feature for their data center. The solution must ensure network resilience, reduce network instability for Layer 3 routing protocols, and meet these requirements:? The device must notify its neighbors when the control plane is undergoing arestart.? The solution must suppress routing flaps in case of stateful switchovers.Which solution must be implemented?
The user traffic destined to all web servers located in the data center must pass firstthrough a set of firewalls for deep packet inspection. A network architect must design theCisco Intelligent Traffic Director (ITD) deployment that meets these requirements:. The firewalls are connected to a set of two Cisco Nexus switches to providestateful handling of traffic.. The ITD service is provided for inside and outside segments of the firewall.Which ITD deployment mode must be implemented to meet these requirements?
An engineer is implementing a Cisco UCS environment The requirements for the solutionare for the MAC addresses to be learned only on the server-facing ports. The use of theSpanning Tree Protocol must be avoided. Also, the engineer must have deterministic traffichandling from blades to uplink ports.Which two settings must be selected to meet these requirements? (Choose two.)
A cloud provider deploys an infrastructure based on Cisco ACI Fabric, Cisco UCS, andCisco HyperFlex Data Platform. The storage area network will be based on Cisco MDS9000 Series Switches with Hyper-V, VMware, and KVM used as the virtualization platform.The requirement is to deploy the overall solution by using a robust automation andorchestration tool.Which tool meets these requirements?
The end users report issues with datastore reachability between the newly installed virtual machines (VMs) and the storage array. The VMs are deployed on a Cisco C-Series server, directly connected with Cisco Nexus 5672UP switches over FCoE VLAN. The data traffic on VLAN 99, which is designated as a native VLAN, reaches its default gateway, but FCoE VLAN 99 fails to access the datastore. Which action resolves the problem?
An engineer is experiencing performance issues on a cisco UCS blade server. The Bseries blade server contains four CPUs, most of which are idle. The engineer notices thatthe CPU is suffering from too many requests sent by the NIC. Additionally, the number ofqueues appears to be insufficient and only a single CPU is processing the network traffic.Which policy must be used to alleviate these issues?
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
An engineer manages hundreds of Cisco Nexus Series and 9000 Series Switches that areinstalled at several data centers and wants to use one of the built-in automation tools of theCisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool thatuses imperative language, has extensive support, and is object-oriented. Which automationtool should be used to meet these requirements?
An engineer must connect an existing Cisco Fabric Interconnect to an IP-based storage array. The connection be a channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic. Which port type should be used to meet these requirements?
An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes. In addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6. Which two components should be used to meet these requirements (Choose two.)
A network engineer is designing a Cisco Hyperflex infrastructure. The Infrastructure will beconnected to an external SAN fiber channel array and must support Microsoft clustering.Which storage connectivity method must be used to meet these requirements?
A company data center requires a new disaster recovery solution to host critical services. The solution can sustain several hours of data loss because the services are routinely backed up to an offsite location. Also, the disaster recovery solution must provide 24-hour availability. Due to the strict policy requirements, the company wants to retain complete control of when the failover process occurs. Which solution meets these requirements?
Dumpsgroup is a verified platform for certification preparation. Our expert professionals are working day and night to create the perfect Practice Exam so you can pass your exam with flying colors. We provide only the authentic and valid Practice Questions approved by IT Experts. Start your certification journey now!
www.dumpsgroup.com
1104 Long Street, NY, 11206, USA
Feel free to contact us, we are available 24/7.
