350-601 Implementing Cisco Data Center Core Technologies (350-601 DCCOR) Dumps
If you are looking for free 350-601 dumps than here we have some sample question answers available. You can prepare from our Cisco 350-601 exam questions notes and prepare exam with this practice test. Check below our updated 350-601 exam dumps.
DumpsGroup are top class study material providers and our inclusive range of 350-601 Real exam questions would be your key to success in Cisco CCNP Data Center Certification Exam in just first attempt. We have an excellent material covering almost all the topics of Cisco 350-601 exam. You can get this material in Cisco 350-601 PDF and 350-601 practice test engine formats designed similar to the Real Exam Questions. Free 350-601 questions answers and free Cisco 350-601 study material is available here to get an idea about the quality and accuracy of our study material.
Sample Question 4
A new employee must be granted access to add VLANs into an existing Cisco UCS
Manager and configure NTP synchronization with date and time zone settings. Which two
privileges must be granted to the employee to complete the task? (Choose two.)
A. Service Profile Compute (Is-compute) B. Ext LAN Config (ext-lan-security) C. Service Profile Network Policy (Is-network-policy) D. Service Profile Config (Is-config) E. Ext LAN Policy (ext-lan-policy)
service profiles will add VLANs to vNICs only if they are configured to UCS manager. So service profile is not valid solution.
Sample Question 5
AN engineer is implementing an import operation in Cisco UCS Manager. What is the
impact of performing this operation?
A. A configuration can be imported from a higher release to a lower release. B. Information can be modified on the management plane only. C. Only a configuration file that was exported from the same Cisco UCS Manager can be imported. D. An import operation can be scheduled.
Answer: B
Sample Question 6
Which two actions should be performed before upgrading the infrastructure and firmware of
multiple UCS blades? (Choose two)
A. Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 15%
available space B. Enable Smart Call Home feature during the firmware upgrade process C. Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 10% available space D. Run the Check Conformance feature to verify that all your components are running the compatible firmware version after the upgrade E. Get Full State and All Configuration backup files before beginning the upgrade
Answer: D,E
Sample Question 7
An engineer is implementing Cisco Intersight in a secure environment. The environment must use LDAP directory service and ensure information integrity and confidentiality. Which two steps must be taken to implement the solution? (Choose two.)
A. Enable Encryption for LDAP B. Add a self-signed LDAP certificate to Cisco Intersight. C. Enable Certificate Signing Request in Cisco Intersight. D. Add a trusted root LDAP certificate to Cisco Intersight E. Add a trusted OAuth token to Cisco Intersight
Answer: A,D
Sample Question 8
Which statement about the impact of a rolling EPLD upgrade on a Cisco MDS 9000 Series Switch is true?
A. All modules on the switch are disrupted. B. An EPLD upgrade is nondisruptive. C. Only the modules that are being upgraded are disrupted. D. The upgrade can be performed from the standby supervisor module.
Answer: C
Sample Question 9
Port security is enabled on a Cisco MDS 9000 series Switch. Which statement is true?
A. Cisco Fabric Services must be disabled before enabling port security. B. Port security can be enabled only globally and affects all VSANs. C. Auto-learning is always enabled automatically when port security is enabled. D. Any devices currently logged in must be added manually to the device databased.
Answer: C
Sample Question 10
What are two recommended design choices in a topology for multipathing iSCSI traffic?
(Choose two.)
A. two NICs bonded together on the initiator B. dual initiators to a single target with bonded interfaces C. initiators and targets in separate subnets D. dual initiators to dual targets E. single initiator to dual targets
Answer: B,C
Sample Question 11
An engineer is running an ACI fabric, has VMM integration with VMware vCenter, and
wants to enable microsegmentation based on vCenter VM attributes. Which statement
about microsegmentation is true?
A. ACI does not support microsegmentation based on vCenter VM attributes. You should
use network attributes for mircosegmentation. B. An ACI microsegmented EPG automatically creates a port group with a private VLAN
configured on a VMware vCenter distributed virtual switch. C. When enabled, microsegmentation performs distributed switching and routing on the
ESXi hosts. D. Microsegmentation is supported only using AVE or AVS.
Answer: B
Sample Question 12
A customer has a requirement to deploy a cloud service and needs to have full control over
the underlying OS, data and application. Which cloud model meets this requirement?
A. PaaS B. MaaS C. IaaS D. SaaS
Answer: C
Sample Question 13
An engineer is asked to manage a large-scale data center and collect information from
multiple Cisco NX-OS devices using Cisco NX-OS Data Management Engine model.
Which technology should be used to accomplish this goal?
A. NX-API REST B. NETCONF C. JSON-RPC D. NX Yang
Answer: A
Sample Question 14
A network engineer repeatedly saves a configuration on Catalyst switches to NVRAM using
the write memory command. What action should be taken to implement the same action on
Nexus switches?
A. Use the write memory command to save the configuration. B. Use the alias command to use the write memory command. C. Use the exit command to leave the configuration mode and save the configuration automatically. D. Use the wri command to use the copy running-config startup-config command.
Answer: B
Sample Question 15
An engineer is asked to use SaaS to manage Cisco computing. Which two items are
needed to accomplish the task? (Choose two.)
A. UCS Manager B. Node name/Serial Number C. Device/Claim ID D. UCS Central E. Intersight
Answer: A,E
Sample Question 16
Which event is expected during direct upgrade of Cisco UCS Manager firmware?
A. The I/O Module reboots immediately after the firmware is activated. B. All users logged in to the UCSM are logged out, and their sessions end. C. Data traffic is disrupted for a single fabric interconnect setup. D. IPMI polling is interrupted.
Answer: D
Sample Question 17
An engineer is configuring a vHBA template in UCS Manager. The engineer needs to
specify the logical addresses used by the vHBA and the path through which the SAN traffic
flows. Which two resources must be specified in the vHBA template? (Choose two.)
A. MAC addresses B. WWPNPool C. WWNN D. VLAN ID E. Fabric ID
Answer: B,E
Sample Question 18
Which two methods are available to Manage an ACI REST API session authentication when a user is unauthenticated?
A. POST to aaaLogin B. POST to aaaUserLogin C. GET aaaRefresh D. GET to aaaListDomains E. DELETE to aaaLogout
Answer: A,C
Sample Question 19
What is required for using puppet in a Cisco NX-OS environment?
A. Open Agent Container B. XML management interface C. NX-API D. OpenNP
Answer: A
Sample Question 20
What is a recommended design choice in a topology for multipathing iSCSI traffic?
A. single initiator to dual targets B. initiators and targets in separate subnets C. dual initiators to a single target with bonded interfaces D. two NICs bended together on the initiator
Answer: B
Sample Question 21
Which configuration implements static ingress replication?
A. interface nve 1member vni 2100980ingress-replication protocol staticpeer-ip 10.0.0.4 B. interface nve 1member vni 127772151ingress-replication protocol bgp C. interface nve 1member vni 3126980peervtep 10.0.0.4ingress-replication protocol staticpeer-ip 10.0.0.4 D. interface nve 1member vni 384233213peer vtep 10.0.0.41
Answer: A
Sample Question 22
What are two requirements when planning a Cisco HyperFlex All Flash standard cluster
installation using three HX240c M5 servers? (Choose Two)
A. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames do not
have to be enabled on the upstream switches. B. The hypervisors must be installed to Cisco FlexFlash SD cards. C. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames must also be enabled on the upstream switches D. The cluster deployment type must support a mix of HDD and SSD. E. The servers must be discovered, unassociated, and connected to each fabric interconnect.
Answer: C,E
Sample Question 23
An engineer is implementing FCoE. Which aspect of DCBXP on a Cisco Nexus switch
affects this implementation?
A. It uses the Cisco Fabric Services protocol to exchange parameters between two peer
links. B. It always is enabled on 10/100-Mbps native Ethernet ports. C. It provides the authentication of peers on the Cisco Nexus switch. D. It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface.
Answer: D
Sample Question 24
In an FCoE environment, for which two sets of data must an interface that implements the
PAUSE mechanism always provision sufficient ingress buffer? (Choose two)
A. frames that were sent with high credit B. frames that were processed and transmitted by the transmitter before the PAUSE frame left the sender C. frames that were sent on the link but not yet received. D. frames that were sent on the link and received. E. frames that were processed and transmitted by the transmitter after the PAUSE frame left the sender.
Answer: B,C
Sample Question 25
An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration. The relevant access policies and tenant policies have
been created. A single AAEP is used to configure the access port in the fabric. Which two
additional steps must be taken to complete the configuration? (Choose two.)
A. A contract must be defined between the EPGs B. The EPGs must be linked to the correct physical domain C. The EPGs must link directly to the corresponding AAEP D. The corresponding bridge domains must be configured in legacy mode E. The EPGs must be configured as static ports
Answer: A,C
Sample Question 26
Which two actions are needed to configure a single Cisco APIC controller for Cisco ACI
fabric for the first time? (Choose two.)
A. Register the APIC that is connected to the switch. B. Configure the first Cisco APIC controller C. Configure the leaf switch where the Cisco APIC is connected, using CLI to allow APIC connectivity D. Register the switches that are discovered through LLDP. E. Register all leaf and spine switches
Answer: D,E
Explanation: Please provide exact snap shot of this question.
Sample Question 27
The FCoE technology is used in a data center and the MDS switches are configured as
Fibre Channel Forwarders. What configuration should be applied to an MDS switch in order
to be used as the best switch to connect by the CNAs in the fabric?
A. fcoe fcf-priority 1024 B. fcoe fcf-priority 512 C. fcoe fcf-priority 0 D. no fcoe fcf-priority
Answer: C
Sample Question 28
Which two components are used by the Cisco Nexus switches telemetry process? (Choose
two)
A. data encoding B. data manipulation C. telemetry agent D. telemetry compression E. data collection
Answer: A,E
Sample Question 29
An engineer must configure SAN connectivity in Cisco UCS manager. The requirement is to specify the WWPN of the storage array and set the zoning type to single initiator multiple targets. The engineer must also configure interrupt handling and queues of the vHBA interface. Which two Cisco UCS policies should be used to configure the settings? (Choose two.)
A. SAN connectivity policy B. Fibre Channel adapter policy C. vHBA policy D. boot policy E. storage connection policy
Answer: B,E
Sample Question 30
A network engineer must configure a Cisco MDS switch to use the local user database for
console access if all AAA servers are unreachable. Which configuration should be applied
to complete this task?
A. aaa authentication login default fallback error local B. aaa authentication login default local C. aaa authentication login console local D. aaa authentication login console fallback error local
Answer: D
Sample Question 31
An administrator needs to configure an automated policy to shut down a link when a given
threshold is exceeded on MDS switch. Which feature needs to be used?
A. Scheduler B. RMON C. EEM D. Call Home
Answer: C
Sample Question 32
When the default firmware package is set a new version, which type of policy determines the timing of server reboots during the firmware upgrade?
A. maintenance B. local disk C. BIOS D. diagnostics
Answer: A
Sample Question 33
Which two authentication types does Cisco UCS Manager support when configuration authentication? (Choose two.)
A. local B. LDAP C. 802.1X D. Kerberos E. PAM
Answer: A,B
Sample Question 34
An engineer wants to create a backup of Cisco UCS Manager for disaster recovery
purposes. What are two characteristics of a full state backup of a Cisco UCS Manager
database? (Choose two.)
A. performs a complete binary dump of the database as a txz file B. contains all of the configurations C. performs a complete binary dump of the database as a bin file D. performs a complete binary dump of the databases as a sql file E. contains all of the runtime states and statuses but not the configurations
Answer: B,C
Sample Question 35
A network engineer is adding a Cisco HyperFlex data platform to the Cisco intersight
management portal. Which two components are required for Intersight to claim the Cisco
HyperFlex data platform? (Choose two.)
A. device FQDN B. device public IP address C. device claim code D. device ID E. device serial number
Answer: C,D
Sample Question 36
An engineer changed a configuration and must perform a rollback. Which statement
applies to a Cisco Nexus 5600 Series switch?
A. Errors are skipped when an atomic rollback type is triggered. B. A user who is assigned to the network-operator user role can perform a rollback. C. The configuration rollback functionality is disabled when FCoE is enabled. D. A system checkpoint is generated automatically when the running configuration is saved to NVRAM.
Answer: C
Sample Question 37
What is an advantage of steaming telemetry over SNMP?
A. MD-5based authentication on polling B. periodic polling of the device status C. periodic push-based subscription messages D. on-change traps sent to a receiver
Answer: C
Sample Question 38
An engineer is enabling port security on a Cisco MDS 9000 Series Switch. Which feature of
enabling port security on a Cisco MDS 9000 Series Switch must be considered?
A. It always learns about switches that are logging in. B. It can be distributed by using Cisco Fabric services. C. It authorizes only the configured sWWN to participate in the fabric. D. It binds the fabric at the switch level.
Answer: B
Sample Question 39
Which two statements describe about modifying Cisco UCS user accounts are true?
(Choose two.)
A. The password of the user account must contain a minimum of 10 characters. B. Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect. C. Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP. D. The password of the user account expires in 30 days. E. The admin account can be used to log on by using SSH only.
Answer: B,C
Sample Question 40
An engineer must connect a Cisco UCS appliance port directly to NFS and iSCSI storage devices. Which action should be taken to achieve this goal?
A. Configure NFS and iSCSI to use the same VLAN tag on the appliance port B. Configure the appliance ports in access mode and apply VLAN tagging on the storage C. Configure the appliance ports in trunk mode and apply VLAN tagging on the storage D. Configure VLAN tagging on the storage and the Cisco UCS simultaneously
Answer: C
Sample Question 41
An engineer must configure Cisco IMC server management NIC for autonegotiation. Which setting should be selected?
A. Cisco card B. shared LOM C. dedicated D. shared LOM EXT
Answer: C
Sample Question 42
What are two types of FC/FCoE oversubscription ratios? (Choose two.)A. server storage to end-node count
B. port bandwidth to uplink bandwidth C. edge ISL bandwidth to core ISL bandwidth D. host bandwidth to storage bandwidth E. switch processing power to end-node processing power
Answer: C,D
Sample Question 43
A small remote office is set to connect to the regional hub site via NSSA ASBR. Which type
of LSA is sent to the remote office OSPF area?
A. type 7 LSA B. type 3 LSA C. type 1 LSA D. type 5 LSA
Answer: A
Sample Question 44
Due to new regulatory requirements from a third party, organization ABC must enable twofactor authentication for the Cisco UCS environment. The requirement is also to provide
redundancy if the authentication server goes offline. Which three authentication
components must be enabled to meet this requirement? (Choose three.)
A. provider group B. authentication domain C. TACACS+ D. LDAP E. local
Port security is statically configured on a Cisco Nexus 7700 Series switch and F3 line card.The switch is configured with an Advanced Services license. Which two actions delete
secured MAC addresses from the interface? (Choose Two)
A. The address must be removed from the configuration. B. The address must reach the age limit that is configured for the interface. C. The interface must be converted to a routed port. D. The device must be restarted manually. E. Shutdown and then no shutdown must be run on the interface.
What is an advantage of using Ansible for automation as compared to puppet and chef?
A. Ansible automates the enforcement of configuration settings. B. Ansible perform automation without installing a software agent on the target node. C. Ansible configures a set of CLI commands on a device by using NETCONF. D. Ansible abstracts a scenario so that set of configuration setting can be used acrossmultiple operating systems.
Answer: B
Sample Question 47
What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex
deployment?
A. offline encryption acceleration B. increased network throughput C. GPU acceleration D. Increased compression efficiency
Answer: D
Sample Question 48
An engineer is converting a Cisco MDS switch to support NPIV mode. What should be
considered when implementing the solution?
A. It must be enabled on VSAN 1 only. B. It must be enabled globally on all VSANs. C. It requires mapping of external interface traffic. D. It requires the FLOGI database to be disabled.
Answer: B
Sample Question 49
An engineer configures a role for a new user in Cisco UCS Manager The role should allow
the user to configure vHBAs, vNICs, and server port types. Which role should be assigned
to allow the engineer to complete this task?
A. network administrator B. operations C. server-compute D. AAA administrator
A Cisco MDS 9000 series storage Switch has reloaded unexpectedly. Where does the engineer look for the latest core dump file?
A. /mnt/core B. /mnt/pss C. /mnt/logs D. /mnt/recovery
Answer: B
Sample Question 51
Which solution provides remote and direct file-level access to users and systems?
A. direct-attached storage B. Fibre Channel over Ethernet C. storage area network D. network-attached storage
Answer: D
Sample Question 52
Which statement is true about upgrading the firmware on a Cisco MDS storage switch with dual supervisors?
A. The standby supervisor must be offline before the firmware upgrade begins. B. Both supervisors load the new firmware and then the active supervisor reboots. C. Supervisors can be upgraded independently to test the new firmware. D. The new firmware is load on the standby supervisor first.
Answer: D
Sample Question 53
A network architect wants to propose a scalable network monitoring solution in which data is repeatedly acquired from network devices. The solution must use a push model and provide close to realtime access to operational data. Which technology must be used to meet these requirements?
A. streaming telemetry B. logging C. SNMPv3 D. CLI-based scripting
A UCS B- Series server located in B5108 chassis 1 slot 1 is currently unavailable. The
server needs to be associated with a specific service profile when it becomes available.
Which associate service profile option should be selected to accomplish this goal?
A. server pool B. server C. custom server D. restrict migration
What is an advantage of NFS as compared to Fibre Channel?
A. NFS enable thin provisioning for LUNs. B. NFS provides the dynamic allocation of storage capacity. C. NFS removes the impact of IP overhead. D. NFS provides direct access to the underlying storage hardware.
Answer: B
Sample Question 56
APIC EPG Resolution Immediacy is set to “Immediate” Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?
A. The “Immediate” and “On demand” options require a port group to be created on the VDS. B. If “On demand” is selected, the policy is programmed in the hardware only when the APIC detects a VM created in the EPG. C. If “On demand” is selected the policy is programmed in the hardware only when the first packet is received through the data path. D. If “immediate” is selected the policy is programmed in the hardware as soon as the leaf is booted.
Answer: C
Sample Question 57
An engineer must perform a nondisruptive software upgrade on a dual supervisor Cisco Nexus 7000 series switch. What is the cause of the upgrade being disruptive?
A. The show install all impact command is not issued Before the upgrade B. The kickstart image is installed by using the install all kickstart image system image command C. Attempt to simultaneously upgrade more than three cards D. Change of the configuration settings or the network connections during the upgrade process
Answer: D
Sample Question 58
An engineer is implementing the Cisco ACI fabric and must create two different vPCs fromleaf switches A and B. The vPCs are deployed as follows:• vPC 1 encompasses ports Eth 1 /1 on leaf A and B and connects to server 1.• vPC 2 encompasses port Eth1/2 on leaf A and B and connects to server 2.A leaf switch profile listing leaves A and B is already configured Which ACI object must be created to meet these requirements?
A. two vPC interface policy groups B. one access port interface policy group C. two PortChannel interface policy groups D. one vPC interface policy group
Answer: A
Sample Question 59
When a strict CoPP policy is implemented, which statement describes an event during
which packets are dropped?
A. Fifteen SSH sessions remain connected to the switch. B. A large system image is copied to a switch by using the default VRF. C. A ping sweep is performed on a network that is connected through a switch. D. A web server that is connected to a switch is affected by a DDoS attack.
Answer: B
Sample Question 60
Which service profile is affected if the default host firmware policy in Cisco UCS Manager is changed?
A. any service profile that has no host firmware policy defined B. any service profile that uses a user-created host firmware policy C. any service profile that is not in the root sub-org D. any service profile that uses the global-default host firmware policy
Answer: A
Sample Question 61
Which virtual MAC address is the default for HSRP version 2 group 10?
A. 0000.5E00.0110 B. 0000.0C9F.F010 C. 3719.0351.1C0A D. 0000.0C9F.F00A
Answer: D
Sample Question 62
Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?
A. switch(config-vsan-cb># vsan 100 bind interface fc 3/1 B. switch<config-vsan-db)# vsan 100 bind interface vfc 31 C. switch(config-vsan-db># vsan 100 fc 3/1 D. switch(config-vsan-db)# vsan 100 interface vfc 31
Answer: D
Sample Question 63
Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCSManaged Server Software bundle? (Choose two.)
The engineer must configure SPAN on a cisco Nexus 5000 Series switch to get a capture
of the traffic from these applications for an in-depth packet analysis. Which two
characteristics must be considered? (Choose two.)
A. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source
ports. B. The rx/tx option is available for VLAN or VSAN SPAN sessions. C. SPAN source port can be monitored in multiple SPAN sessions. D. Only Ethernet, FC, vFC, port channel port types can be a destination SPAN port. E. A SPAN source port cannot be a destination SPAN port.
Answer: A,E
Sample Question 65
An engineer is duplicating an existing Cisco UCS setup at a new site. What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)
A. contains the AAA and RBAC configurations B. contains a file with an extension.tgz that stores all of the configurations C. contains the configuration organizations and locales D. contains all of the configurations E. contains the VLAN and VSAN configurations
Answer: C,E
Sample Question 66
Which action must be performed before renumbering a Cisco UCS chassis?
A. Move the chassis to new ports on fibric interconnect. B. Re-acknowledge the chassis. C. Decommission the chassis. D. Run the shut and no shut command on the connected ports.
Answer: C
Sample Question 67
Which two statements about the process of upgrading an EPLD on a Cisco MDS 9000 series Switch are correct? (Choose two.)
A. The EPLDs for all the modules on a switch must be upgraded at the same time. B. EPLD upgrades can be completed without powering down the module during the upgrade. C. EPLDs can be upgraded only to the latest EPLD image. D. EPLDs can be upgraded without replacing the hardware. E. An upgrade verification identifies the impact of each EPLD upgrade.
Answer: D,E
Sample Question 68
An engineer is implementing OTV on a transport that supports multicast. The solution needs to meet the following requirements:• Establish adjacency to the remote peer by using multicast.• Enable OTV advertisements for VLAN 100 to the other site.Which two commands should be configured to meet these requirements? (Choose two.)
A. otv site-vlan 100 B. otv data-group 232.2.2.0/28 C. otv use-adjacency-server 172.27.255.94 D. otv extend-vlan 100 E. otv control-group 232.1.1.1
Answer: D,E
Sample Question 69
Which statement about the MAC address that the FCoE Initialization Protocol chooses for
use by an E-Node in an FCoE implementation is true?
A. The FCoE Initialization Protocol uses the burned-in MAC address of the converged
network adapter for all FCoE operations. B. The FCoE Initialization protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre
Channel ID to create a fibric-provided MAC address. C. The FCoE Initialization Protocol uses 01.00.0C as the first 24 bits of the MAC address
and appends a 24-bit Fibre Channel ID to derive a full 48-bit FCoE MAC address. D. FCoE does not use a MAC address. The FCoE Initialization Protocol is used to acquire
a Fibre Channel ID, and the address is used for all FCoE communications in the same way
as Fibre Channel Protocol.
Answer: B
Sample Question 70
An engineer is seeking the most optimal on demand CPU performance while configuring the BIOS settings of UCS C-series rack mount server.
A. C0/C1 state B. C6 Retention C. C2 state D. C6 non-Retention
Answer: A
Sample Question 71
An engineer is implementing a Cisco UCS system with directly connected Fibre channel
storage array. Which two actions should be taken to accomplish this task? (Choose two.)
A. Create a new vHBA that is dedicated to the array B. Configure the Fibre Channel port as a Fibre channel storage port C. Configure a storage connection policy D. Configure a new VSAN E. Configure a Fibre Channel port channel
Answer: B,D
Sample Question 72
An engineer must ensure fabric redundancy when implementing NPV mode on a Cisco
MDS 9000 Series Switch. Which action enables fabric redundancy?
A. Connect the NPV devices to multiple upstream switches. B. Add a port channel to upstream switches. C. Configure the NPV devices to use on external FLOGI database. D. Use TE ports to connect to upstream switches.
Answer: B
Sample Question 73
Which Cisco network assurance engine feature helps reduce the need for Tier 1 network
operation centers to escalate issues?
A. detailed TCAM optimization B. DVR audit trails C. operator playbooks D. detailed runbooks
An engineer must build a lab replica of a Cisco UCS production environment. The file must
be imported into a new Cisco UCS cluster using a Cisco UCS manager GUI. The file must
be in XML format and be exported from Cisco UCS Manager using encrypted method.
Which two configuration parameters should be selected to meet these requirements?. (Choose two.)
A. Type: Logical configuration B. Protocol SCP C. Type Full state D. Protocol TFTP E. Type All configuration
Answer: B,E
Sample Question 75
An engineer must generate a checkpoint of the running configuration on a Cisco Nexus
Switch. The checkpoint file name must be called "before_maintenance' and should be used
for recovering the switch to its pre-maintenance state. The rollback of the checkpoint to
running configuration should only occur if no errors occur. Which two configuration
commands must be used to meet these requirements? (Choose two.)
A. rollback checkpoint file before_maintenance stop-at-first-failure B. checkpoint file before_maintenance C. checkpoint before_maintenance D. rollback running-config file before_maintenance atomic E. rollback running-config checkpoint before_maintenance
